Now in your cart  0 items
  1. This product was added to our catalog on Thursday 05 April, 2018.

    Elinchrom ELC Pro HD 1000w Flash Head Only [20616.1]

    Price:   £1,019.00

    This is the Elinchrom ELC Pro HD 1000w Flash Head Only [20616.1]

    The Elinchrom ELC Pro HD 1000w Flash Head Only is evidence of the company's continued commitment to pushing the envelope in monolight design. Elinchrom has packed the ELC Pro HD 1000 with professional features we've come to expect from a flash head of this caliber and added quite a bit more. Short recycling times coupled with fast flash durations make freeze-motion, stop-action shooting possible. In fact, up to 20 frames per second is possible at minimum power. An intelligent low noise, temperature activated fan keeps the head cool and lengthens the life of both the flash tube and modelling lamp. A pre-flash detector lets you integrate your on-camera flash into your studio system. Power, variable continuously from 7 to 1,000W/s, can be mimicked by the 300W proportional modelling lamp to preview your effects. Although Elinchrom provides one, you can swap the sync cord with a separately purchased 8-channel transceiver for wireless triggering from your camera. The head has one built-in to receive the signal. Flash modes allow you to address special situations. The Sequential Mode enables triggering up to 20 ELCs in bursts or in a continuous cycle. Delayed Mode offers a choice of first or second curtain syncing while Strobo Mode allows single frame stroboscopic action sequences. Finally, the auto-sensing multi-voltage power supply means that you can use the ELC Pro HD 1000 anywhere in the world.

    Built-in EL-Skyport receiver for triggering
    EL-Skyport with 8 frequency channels with 4 groups
    EL-Skyport Speed Sync mode for synchronization up to a 1/320 sec. on enabled SLR cameras
    Intelligent pre-flash detector system to enable the use of ELC units with speedlights
    8 f-stop range
    Action-freezing flash durations of 1/1,430 @ full power (t0.5) and as short as 1/5,260 sec. at 80W/s
    Stable even at fastest recycling times
    Up to 20 flashes per second
    Consistent color temperature with +/-150K°,
    Power Auto-dump
    Multi-voltage auto-detection: 90-265VAC excluding modelling lamp
    Low 5V sync voltage safe for all digital camera systems
    Intelligent low-noise fan spins slower or faster depending on the internal temperature of the unit
    Impact resistant and fire-retardant body shell
    Accessory bayonet permits use of the complete range of light modifiers

    Maximum Watt/Seconds 1,000
    Guide Number 298' (90.8 m) @ 3.3' (1.0 m), ISO 100 with 48°, reflector
    Recycle Time To full power @ 230VAC Slow: 4.0 sec., Default: 1.5 sec., Fast: 1.2 sec. @ 115VAC Slow: 5.0 sec., Default: 1.8 sec., Fast: 1.4 sec.
    Maximum flashes per sec. at min. power: 20
    Flash Duration Min/Max: 1/2,780/1/1,430 @ t0.5 At 80W/s: 1/5,260 (power setting: 3.6)
    Flash Variability 8.0 Stops: 7.0 -1,000W/s in 1/10 stop increments
    Power range display: 0.3 -7.3
    Color Temperature 5,500K
    User Replaceable Flashtube Yes, S-Type, Omega plug-in
    Changeable Reflector Yes
    Modeling Light Wattage 300W GX 6.35
    Modeling Light Control Full, Free, Proportional
    Voltage Stabilization Yes, +/-0.1%
    Flash Ready Indicator Audible and LED
    Operating Voltage 90 -265VAC, 50/60Hz
    Sync Voltage 5.0V
    Sync Socket 3.5mm Jack
    Umbrella Mount 7.0mm Diameter
    Built-in Slave Cell Optical/IR
    Integrated transceiver: 8 frequency channels with 4 Groups with full RX features
    Circuit Protection Fuse
    Power Consumption @ 230VAC, 50Hz
    Slow: during charge: 350
    Default: during charge: 700
    Fast: during charge: 875, @ 115VAC, 60Hz
    Slow: during charge: 250 Default: during charge: 500 Fast: during charge: 625
    Pure Sine Wave Converter AC/DC, slow charge: 600 with halogen
    Fan Cooled Yes, temperature controlled
    Auto Dump Yes
    Dimensions 12.4 x 5.5 x 8.2'' (31.5 x 14 x 21cm) With protective cap
    Weight 6.4lb (2.9kg)

    Set Content:
    1x ELC Head 500
    1x 16cm Reflector
    1x Transparent Glass Dome
    1x Sync Cable
    1x Mains Cable