Now in your cart  0 items
  1. This product was added to our catalog on Thursday 05 April, 2018.

    Elinchrom ELC Pro HD 500w Flash Head Only [20613.1]

    Price:   £799.00

    This is the Elinchrom ELC Pro HD 500w Flash Head Only [20613.1]

    The Elinchrom ELC Pro HD 500w Flash Head Only is evidence of the company's continued commitment to pushing the envelope in monolight design. Elinchrom has packed the ELC Pro HD 500 with professional features we've come to expect from a flash head of this calibre and added quite a bit more. Short recycling times coupled with fast flash durations make freeze-motion, stop-action shooting possible. In fact, up to 20 frames per second is possible at minimum power. An intelligent low noise, temperature-activated fan keeps the head cool and lengthens the life of both the flash tube and modelling lamp. A pre-flash detector lets you integrate your on-camera flash into your studio system.

    Power, variable continuously from 7 to 500W/s, can be mimicked by the 300W proportional modelling lamp to preview your effects. Although Elinchrom provides one, you can swap the sync cord with a separately purchased 8-channel transceiver for wireless triggering from your camera. The head has one built-in to receive the signal. Flash modes allow you to address special situations. The Sequential Mode enables triggering up to 20 ELCs in bursts or in a continuous cycle. Delayed Mode offers a choice of first or second curtain syncing while Strobo Mode allows single frame stroboscopic action sequences. Finally, the auto-sensing multi-voltage power supply means that you can use the ELC Pro HD 500 anywhere in the world.

    Built-in EL-Skyport receiver for triggering
    EL-Skyport with 8 frequency channels with 4 groups
    EL-Skyport Speed Sync mode for synchronization up to a 1/320 sec. on enabled SLR cameras
    Intelligent pre-flash detector system to enable the use of ELC units with speedlights
    8 f-stop range
    Action-freezing flash durations of 1/2,330 @ full power (t0.5) and as short as 1/5,000 sec. at 53W/s
    Stable even at fastest recycling times
    Up to 20 flashes per second
    Consistent colour temperature with +/-150K°,
    Power Auto-dump
    Multi-voltage auto-detection: 90-265VAC excluding modelling lamp
    Low 5V sync voltage safe for all digital camera systems
    Intelligent low noise fan spins slower or faster depending on the internal temperature of the unit
    Impact resistant and fire retardant body shell
    Accessory bayonet permits use of the complete range of light modifiers

    Maximum Watt/Seconds 500
    Guide Number 212.6' (64.8 m) @ 3.3' (1.0 m), ISO 100 with 48°, reflector
    Recycle Time At full power: @ 230VAC Slow: 2.0 sec., Default: 0.75 sec., Fast: 0.6 sec, @ 115VAC Slow: 2.5 sec., Default: 0.9 sec., Fast: 0.7 sec.
    Maximum flashes per sec at min power: 20
    Flash Duration Min/Max: 1/2,940/1/2,330 @ t0.5 At 53W/s: 1/5,000 (3.1 power setting)
    Flash Variability 7.0 Stops: 7.0 -500W/s Power range display: 0.3 -6.3
    Colour Temperature 5,500K
    User Replaceable Flashtube Yes, S-Type, Omega plug-in
    Changeable Reflector Yes
    Modelling Light Wattage 300W
    Modelling Light Control Full, Free, Proportional
    Voltage Stabilization Yes, +/-0.1%
    Flash Ready Indicator Audible and LED
    Operating Voltage 90 -265VAC, 50/60Hz
    Sync Voltage 5.0V
    Sync Socket 3.5mm Jack
    Umbrella Mount 7.0mm Diameter
    Built-in Slave Cell Optical/IR
    Integrated transceiver: 8 frequency channels with 4 Groups with full RX features
    Circuit Protection Fuse
    Power Consumption @ 230VAC, 50Hz, Slow: during charge: 350, Default: during charge: 700
    Fast: during charge: 875, @ 115VAC, 60Hz, Slow: during charge: 250, Default: during charge: 500, Fast: during charge: 625
    Pure Sine Wave Converter AC/DC, slow charge: 600 with halogen
    Fan Cooled Yes, temperature-controlled
    Auto Dump Yes
    Dimensions 12.4 x 5.5 x 8.2'' (31.5 x 14 x 21cm) With protective cap
    Weight 5.18lb (2.35kg)

    Kit contents:
    Mains Cable
    Sync Cable
    Modeling Lamp (300W)
    Glass Dome
    Protective Cap
    Reflector (6.3''/90°,)
    Limited 2-Year Warranty